Classroom Learning

/Classroom Learning
­

SH202: Inspecting Solar Heating Systems in New York State

SH202 – Inspecting Solar Heating Systems in New York State is a one day in person course geared towards code officials in New York and is approved by the Department of State, Division of Building Standards and Codes for six (6) CEU’s. SH202 is also open to solar installers, architects, engineers and other professionals in NewYork State […]

Training Details 
SHOL101_main_image

PV101: Solar Training – Solar Electric Design and Installation (Grid-Direct)

PV101 is your gateway to a career in the solar industry.  It all starts with the fundamentals, and a solid understanding of various components, system architectures, and applications for PV systems.  Other topics include site analysis, system sizing, array configuration, and performance estimation; electrical design characteristics such as wiring, overcurrent protection, and grounding; a detailed […]

Training Details 
PV101_main_image

PV202: Solar Training – Advanced PV System Design and the NEC (Grid-Direct)

Take a deep dive into National Electrical Code (NEC® 2014) standards as well as other best practices that pertain to designing grid­-direct PV systems. The focus in PV202 is on residential and commercial­-scale systems, but the Code requirements, design parameters, and best practices are applicable to all types and sizes of PV installations. Detailed lessons address requirements for disconnects, […]

Training Details 
PV101_main_image

PV203: Solar Training – PV System Fundamentals (Battery-Based)

Energy storage has been a part of many PV systems since the beginning, but now the market is growing like never before. In PV203 the focus is on the fundamentals of battery­-based PV systems. The applications and configurations are many, and their complexity far exceeds that of grid­-direct PV systems.  Components such as batteries, charge controllers, and battery­-based inverters […]

Training Details 
301L_image1

PV303: Solar Training – Advanced PV Multimode and Microgrid Design (Battery-Based)

Among the most complex PV systems, multimode systems and microgrids have many applications and demand for them is growing fast. Whether powering a campus, providing backup for when the grid is down, or reducing peak demand, there are numerous benefits of PV systems with energy storage that can interact with the utility grid ­ or act as their […]

Training Details 
301L_image1

PV304: Solar Training – Advanced PV Stand-alone System Design (Battery-Based)

Off-­grid was where PV got its start – with so many applications for stand­-alone power, and continual new developments and cost reductions in energy storage technology, this sector of the market is growing like never before. Detailed analysis of load considerations, charge controller sizing, and specifying stand-­alone inverters is followed by numerous design examples that address the wide ranging […]

Training Details 
PVOL203_image3

NAB-PV: NABCEP PV Associate Exam

Solar Energy International proctors the NABCEP PV Associate Exam (formerly known as the NABCEP PV Entry Level Exam) in its Paper & Pencil format on select Friday evenings after some of our PV301L- Solar Electric Lab Week (Battery-Based). It is recommended that your education requirement be completed prior to registering to take the exam. You must call […]

Training Details 
NABCEP_ele