• PVOL202_image3
  • PVOL202_image2
  • PVOL202_image1
  • Jan
  • duration
  • tuition

PVOL202: Solar Training - Advanced PV System Design and the NEC (Grid-Direct) - Online

Apply National Electrical Code (NEC) standards and industry best practices to residential and commercial grid-direct solar electric systems to ensure safe, code-compliant design and installation. This online solar training workshop builds upon the core concepts from PV101, expanding them to address larger, more complex grid-direct PV systems.

what you will learn

PV202 focuses significantly on the National Electrical Code, including interconnection calculations, grounding, workspace clearances, and disconnect and overcurrent protection sizing and considerations.

Commercial system equipment specifications including inverters, racking, and three-phase interconnection are covered; as well as site considerations for roof- and ground-mounted arrays, including layout and inter-row shading. PV 202 thoroughly addresses array sizing with various inverter configurations, in order to assess design options and optimize performance. Students will learn to evaluate system performance under various operating conditions, and identify and correct installation errors including ground-faults. This course combines class lectures with individual problem solving exercises covering common design considerations. The online course is six weeks long and covers all of the material presented in the in-person workshop.

Students who complete the workshop will be able to perform the following:

  • Determine requirements for disconnects and series fusing, including labeling
  • Perform interconnection and labeling calculations for single- and three-phase AC services
  • Specify inverters based on system variables, and size inverter subpanel combiners
  • Perform calculations related to mounting PV arrays, including inter-row shading and uplift forces
  • Examine array mounting options for large systems
  • Size grounding conductors for the AC and DC side of the system, and identify causes of, and troubleshooting procedures for ground-faults
  • Optimize the match between an inverter and array, and perform sizing and interconnection calculations for commercial-scale systems
  • Identify installation considerations to meet NEC requirements and ensure long-lasting, safe systems
  • Locate and troubleshoot common installation errors when commissioning a system
  • Perform production analysis calculations to compare expected output to measured output for an operating system
see more

helpful information

Prerequisites: PV 101 or PVOL101 (or PV D&I or Grid-Tied PV prior to January 2010)

To view in-person sessions of this workshop, click PV202.

nabcep certification information

SEI Contact Training Hours: 6 Week Online = 60 hours NABCEP Training Hours:

  • PV Installer Certification Requirements: This course counts for 60 advanced training hours.
  • PV Technical Sales Certification Requirements: This course counts for 20 hours, which covers the PV Technical Sales JTA.
  • PV Installer Recertification Requirements: This course counts for the following:
    • 6 NEC (Code Based) Hours
    • 6 Job Task Analysis Hours
    • 6 Non-Technical/Other Hours
  • PV Technical Sales Recertification Requirements: This course counts for the following:
    • 6 Job Task Analysis Hours
    • 6 Non-Technical/Other Hours
  • Solar Heating Installer Recertification: This course counts for 6 Non-Technical continuing education hours.
For information on SEI's Solar Professionals Certificate Program please click here.

more on nabcep certification > more on sei's solar professionals certificate program >
< back to training schedule

available sessions

register for this session >
Course added to cart
This Course cannot be added to cart
This course is already added to cart
Course not added to cart. Try again

course snapshot

  • Online

  • 6 Weeks
  • 10-20 hours/week

course materials

see full material list >

instructors

share